catalog
- Home
- Catalog
- Burring Cutter
- A.N.D. 10050 & MS 33649 Port Contour Cutters, H49P
- A.N.D. 10050 & MS 33649 Port Contour Cutters, H49R
- A.N.D. 10050 & MS 33649 Port Contour Cutters, 49P
- A.N.D. 10050 & MS 33649 Port Contour Cutters, 49R
- S.A.E. Straight Thread Tube Fitting (MS 16142) Port Contour Cutters, H42P
- S.A.E. Straight Thread Tube Fitting (MS 16142) Port Contour Cutters, H42R
- S.A.E. Straight Thread Tube Fitting (MS 16142) Port Contour Cutters, 42P
- S.A.E. Straight Thread Tube Fitting (MS 16142) Port Contour Cutters, 42R
- Rivet Set Shanks Standard AN Rivets
- Straight Rivet Sets Cupped .401 Shank
- Straight Flush Sets .401 Shank
- Straight Flush Sets .498 Shank
- Straight Bell Cupped Sets .498 Shank
- Offset Flush Sets .498 Shank
- Flush Rivet Sets .401 thru .498 Shank
- Mushroom Flush Sets
- Stubby Flush Sets
- Short Shank Rivet Sets Straight Flush
- Short Shank Rivet Sets Offset Cupped
- Cupped Squeezer Sets
- Cupped Sets for Semitubular Rivets
- Cupped Sets .312, .375 Shank
- Flush Squeezer Sets
- Flush Squeezer Sets .312, .375 Shank
- Squeezer Set Retainer Springs
- Strap Duplicator: Spring Type
- Strap Duplicator: Bushing Type
- Strap Duplicator: Bushing Type Inverted
- Speed Driver
- Aircraft Extension Drills
- Set Screw Drill Adapters
- Duplicating Punches
- Hand Rivet Squeezer
- Retainer Springs
- Rivet Guns
- Sheet Fasteners Clecos
- Sheet Fastener Pliers
- Offset Flush Sets .401 Shank
- Straight Rivet Sets Cupped .498 Shank
- Offset Rivet Sets Cupped .498 Shank
- Offset Bell Cupped Sets .498 Shank
- Double Offset Rivet Sets
- Offset Rivet Sets Cupped .498 Shank
- Dimpling Tools Punch
- Dimpling Tools Die
- Cobalt Removable Pilot
Burring Cutter
BURRING CUTTER
CATALOG NO.
CA4475
|
D
|
DASH NO.
|
|
3/8
|
-2
|
|
1/2
|
-4
|
THESE TWO FLUTE CUTTERS ARE FOR USE IN ANGLE DRILLS OR SPEED DRIVERS (CA6005) WITH 1/4 -28 THREADS
STANDARD INCLUDED ANGLES 82, 90, 100 DEGREES
ORDER BY CATALOG NO. AND DASH NO. AND ANGLE